DISTRESSED PAINT FINISHES WITH SARAH JAYNE SIGNATURE CHALK PAINT

PLEASE READ OUR PERFECT PAINTING TIPS BEFOREHAND

Before progressing to distressing your painted piece make sure your overall finish is dry, including any over painted areas or blobs. Touch up any areas that require it. You may need a third coat depending on the darkness of the original item and the shade you are using.

You can at this stage add an additional step of dry brushing for a very distressed vintage look. Choose another shade different to your main shade and with a very dry, preferably old and less than perfect brush, pick up a tiny amount of paint and lightly brush it across some paper or a board so that the brush has a very small amount of powder dry paint on it. Apply this in very light strokes to your item. You may want to practice this technique beforehand.

Now you have your painted item ready for distressing it’s time to start rubbing some of the paint off! This can be a little difficult to get your head around so if you are doing a large or important piece we suggest preparing a small test item to hone your distressing skills first.

Job_10092

First, look at the item and think about if it was very old where it would have been handled or worn. Corners, handles, mouldings etc are all likely candidates, think about your item and where these areas would be.

Lightly sand these areas back and forth, start with a light touch and build up the pressure as you become familiar with the sandpaper and technique. Finer grade sandpaper or flexible sanding blocks are ideal for this.

If you make a mistake you can paint it out, let it dry and have another go.

When you are happy with the effect you can dust away the chalk dust with a suitable cloth, brush or hairdryer. Many people prefer to do distressing outside or in an area where the dust can easily be blown away.

Items that will have a lot of heavy traffic such as table tops, chair seats or drawer tops, will require a coat of Everlong One Coat Sealer. This is also water-based and provides extremely robust protection to protect that finished masterpiece. We advise only using Everlong One Coat Sealer only on the surface of the item (if needed) rather than the whole item.

Show us your distressed finish items!

Share via our Facebook Page or Tweet @theusefulshop

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s